Blog

Having a chipped windshield is common amongst used cars, caused by a stone flying up from the road or other impacts. A cracked windshield can happen unexpectedly and possibly grow too large if neglected. Repairing the damage yourself is easier than you think—thanks to some methods that you can do it yourself without worrying repair or replacement costs for several bucks.

You can repair windshield cracks and chips at home with the aid of a repair kit. It only needs your patience, effort, and time. Airport Auto Sales Used Car Dealership in Fredericksburg, Virginia provides you some tricks and tips on how to deal with chipped and cracked windshield using a windshield repair kit.

How to repair a chipped windshield easily

Be guided with the step-by-step procedure on how to fix a chipped and cracked windshield of your Used Car Dealership in Fredericksburg.

Step 1: Purchase a windshield repair kit. You can get them at a minimal cost in some local auto parts stores. The kit contains Epoxy resin that has a shelf life. You should check the expiration date if it has one.

Step 2: To make sure you get proper adhesion during the repair, clean your used car’s windshield around the chip or crack. Be extra careful with the glass remnants while cleaning it. Used Car Dealerships suggests you to never spray glass cleaner onto the crack or chip directly. Instead, some Used Car Dealership in Fredericksburg suggests you use a microfiber cloth and pour a small portion of rubbing alcohol and wipe the surface. Use a pin to remove the remnants and shards of glass in the chip or cracks.

Step 3: Follow the instructions closely provided in the kit. Use the guide as a reference along with the kit’s instructions. Apply some adhesive pats and plastic pedestal that comes with the windshield repair kit. Peel off the paper backing on the adhesive patch first to expose one side of the adhesive. You should center the patch over the chip or crack and apply it to the clean, dry outdoor-facing side of your used car’s windshield’s glass.

Step 4: Peel off the other side of the paper backing and apply the pedestal to the adhesive.

Step 5: Inject the epoxy resin included in the windshield repair kit with a syringe into the pedestal, filling it up to the top. Compress your syringe down and firmly insert it into the pedestal.

Step 6: Use one hand to hold the pedestal while slowly pulling up the syringe plunger. Keep drawing up the syringe plunger until you finally reach the end of its full length.

Step 7: Hold the pedestal with your hand while you are removing the syringe from the pedestal with your other hand. Then, reinsert the syringe and slowly push its plunger down to force the resin into the crack.

Step 8: Knock the windshield with your knuckles to free any trapped air bubbles in the chip.

Step 9: Once the Epoxy resin is cured, you should remove the adhesive patch and pedestal.

Step 10: Use a razor blade to squeegee out any air bubbles and allow it to cure for a moment. Remove any excess epoxy and carefully wipe the glass with a cloth.

How big is too big?

Be mindful that for windshield’s chips that are larger than a quarter and cracks that are more than three inches long, using a do-it-yourself windshield repair kit is not already recommended. Airport Auto Sales Used Car Dealership in Fredericksburg, Virginia suggests you seek help from a professional glass service for repair or replacement.

The next time you encounter such cracks or chip on your used car’s windshield, fix them immediately by following the steps aforementioned before get even worse or spreads.

Need more tips?

For more car trips and tricks, don’t hesitate to visit and check out our blog at Airport Auto Sales Used Car Dealership in Fredericksburg, Virginia.